- Pilot bore heads
- for clay, silt, loam, marl
Soft Drill Head (SDH) - Steering plates for SDH Soft Drill Head
- Steering plate type Standard for TD 82 L 200 mm
- Steering plate type Standard for TD 82
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Triangle for TD 61, TD 73, Rd 49
- Steering plate type Triangle for TD 82
- Steering plate TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate bent for TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate bent for TD 82, EL 104
- Steering plate with weld-on teeth for TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate with weld-on teeth for TD 82, EL-D104
- Steering plate with weld-on teeth for TD 82, EL 104
- for fine sand up to medium gravel soils
Medium Drill Head (MDH) Type 1- For muzzleloader transmitter housing
- For side loader transmitter housing
- MDH-Gravel Type - Medium Drill Head Type 1 für TD 73 - Ø 115 mm for side loader transmitter housing
- Medium Drill Head Type 1 for EL 104 - Ø 190 mm for side loader transmitter housing
- MDH-Gravel Type - Medium Drill Head Type 1 für TD 82 - Ø 150 mm for side loader transmitter housing
- Medium Drill Head Type 1 for TD 82 / EL 95 - Ø 190 mm for side loader transmitter housing
- for fine sand up to medium gravel soils
Medium Drill Head (MDH) Type 2 - for fine sand up to medium gravel soils
Medium Drill Head (MDH) Type 3 - for coarse gravel mixed soils, debris, hard and aggressive soils
Hard Drill Head (HDH) Type 1- For muzzleloader transmitter housing
- Hard Drill Head Type 1 - Ø 85 mm, for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 61, EL 67 - Ø 95 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 61, EL 67 - Ø 115 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 73, EL 80 - Ø 115 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 for TD 73, EL 80 - Ø 125 mm with exchangeable round framed chisels
- Hard Drill Head Type 1 for TD 82 - Ø 130 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 82 / EL 95 - Ø 155 mm for muzzleloader transmitter housing
- For side loader transmitter housing
- Hard Drill Head Type 1 for TD 73 - Ø 115 mm for side loader transmitter housing
- Hard Drill Head Type 1 for TD 73, EL 80 - Ø 125 mm, with exchangeable round framed chisels
- Hard Drill Head Type 1 for TD 82 - Ø 130 mm for side loader transmitter housing
- Hard Drill Head Type 1 for TD 82 / EL 95 - Ø 155 mm for side loader transmitter housing
- Hard Drill Head Type 1 for EL 104 - Ø 155 mm for side loader transmitter housing
- Hard Drill Head Type 1 for EL 104 - Ø 195 mm for side loader transmitter housing
- For muzzleloader transmitter housing
- for coarse gravel mixed soils, debris, hard and aggressive soils
Hard Drill Head (HDH) Type 2- For muzzleloader transmitter housing
- Hard Drill Head Type 2 for TD 48 / TD 61 - Ø 80 mm, only for transmitter housing Ø 65 mm - muzzleloader
- Hard Drill Head Type 2 for TD 61, EL 67 - Ø 95 mm, for transmitter housing Ø 75 mm - muzzleloader
- Hard Drill Head Type 2 für TD 73, EL 80 - Ø 115 mm, for muzzleloader transmitter housing
- Hard Drill Head Type 2 for TD 82 - Ø 120 mm for muzzleloader transmitter housing
- For side loader transmitter housing
- For muzzleloader transmitter housing
- for hard, compact, non-displaceable soils
Hard Drill Head (HDH) 4-finger - Round-framed chisel
- exchangeable round-framed chisel for 4X / 5X (MDH Type 1)
- exchangeable round-framed chisels for TD 61, EL 67 (MDH Type 2)
- exchangeable round-framed chisels for TD 61, TD 73, EL 67, EL 80 (MDH Type 1)
- exchangeable round-framed chisels for TD 73, EL 80 (MDH Type 2)
- exchangeable round-framed chisels for TD 82 (MDH Type 1 and 2) Ø 150mm
- exchangeable round-framed chisels for TD 82, EL 95, EL 104 (MDH Type 1) Ø 190 mm
- Round-framed chisels with hardened layer
- exchangeable round-framed chisels with hardened layer for TD 61, EL 67 (MDH Type 2)
- exchangeable round-framed chisels with hardened layer for TD 61, TD 73, EL 67, EL 80 (MDH Type 1)
- exchangeable round-framed chisels with hardened layer for TD 73, EL 80 (MDH Type 2)
- exchangeable round-framed chisels with hardened layer for TD 82
- exchangeable round-framed chisels with hardened layer for TD 82, EL 95, EL 104 (MDH Type 1)
- for clay, silt, loam, marl
- Sonde housings
- Sonde housing EL 67 - Ø 75 mm, for standard sondes
- Sonde housing EL 67 - Ø 75 mm, for long sonds and cable sondes
- Sonde house EL 80 - Ø 85 mm, for standard sondes
- Sonde housing EL 80 - Ø 85 mm, for long sondes and cable sondes
- Sonde housing 4X / 5X - Ø 65 mm, for standard sondes without buffer
- Sonde housing TR 34 - Ø 65 mm
- Sonde housing RD 49 - Ø 70 mm
- Sonde housing TD 48 - Ø 65 mm
- Sonde housing TD 61 - Ø 75 mm, for standard sondes (15XP)
- Sonde housing TD 61 - Ø 75 mm, for Eclipse cable sondes + EXL sondes, long version (15XP)
- Sonde housings TD 73 - Ø 85 mm, for standard sonde housings
- Sonde housing TD 73 - Ø 85 mm, for Eclipse cable sondes + EXL sondes, long version
- Sonde housing TD 82 - Ø 100 mm, for Eclipse cable sondes + EXL sondes, long version
- Sonde housing TD 82 - Ø 100 mm, incl. facility for cable-guided bores
- Side loader Sonde housing TD 73 - Ø 85 mm, for standard (15“) sondes
- Side loader Sonde housing TD 82 - Ø 100 mm, for standard (15“) sondes
- Side loader Sonde housing TD 82 - Ø 100 mm, for long (19“) sondes
- Side loader Sonde housing EL 104 - Ø 110 mm, for long sondes and cable sondes
- Side loader Sonde housing EL 104 - Ø 110 mm, for standard probes
- Side loader Sonde housing EL 104 - Ø 110 mm, for long sondes and cable sondes
- Quick-Connector
- Drill rods
- Backreamers
- HSR Chisel Reamer
- Plug-in Reamer Ø 120 mm, Burls, for sonde housing Ø 65-75 mm
- Plug-in Reamer Ø 125 mm, Burls, for sonde housing Ø 85 mm
- Plug-in Reamer Ø 130 mm, Sharkbit, for sonde housing Ø 65-75 mm
- Plug-in Reamer Ø 140 mm, Weld-on claw, for sonde housing Ø 100 mm
- Plug-in Reamer Ø 165 mm, Sharkbit, for sonde housing Ø 75 mm
- Plug-in Reamer Ø 165 mm, Sharkbit, for sonde housing Ø 85 mm
- Plug-in Reamer Ø 175 mm, Sharkbit, for sonde housing Ø 104 mm
- Additional sizes on request
- Soft-Soil-Reamer (SSR) for clay, loam, silt, marl
Winged Reamer / Flycutter - Medium-Soil-Reamer (MSR) for fine sand to medium gravel soils
Stepped Reamer- Backreamer Ø140 mm, welded claw, 5t swivel, TD61
- Backreamer Ø160 mm, welded claw, 10t swivel, TD61
- Backreamer Ø200 mm, welded claw, 10t swivel, TD61
- Backreamer Ø225 mm, welded claw, 15t swivel, TD82
- Backreamer Ø270 mm, welded claw, 15t swivel, TD82
- Backreamer Ø325 mm, welded claw, 15t swivel, TD82
- Backreamer Ø415 mm, welded claw, 30t swivel, TD82
- Backreamer Ø440 mm, welded claw, 30t swivel, TD82
- Backreamer Ø530 mm, welded claw, 30t swivel, TD82
- Additional pull rods / adapters as well as reaming diameters on request
- Medium-Soil-Reamer (MSR) for fine sand up to medium gravel soils
Cone Reamer- Cone reamer Ø 220, Sharkbit, 15t swivel, TD73
- Cone reamer Ø 270, Sharkbit, 15t swivel, TD73
- Cone reamer Ø 325, Sharkbit, 15t swivel, TD73
- Cone reamer Ø 220, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 270, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 325, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 405, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 455, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 500, Sharkbit, 30t swivel, TD82
- Additional pull rods / adapters as well as reaming diameters on request
- Medium-Soil-Reamer (MSR) for fine sand up to medium gravel soils
Grundoream - Sharkbit Blade set
- Sharkbit Ø 150 mm (Basic body I)
- Sharkbit Ø 200 mm (Basic body I)
- Sharkbit Ø 250 mm (Basic body I)
- Sharkbit Ø 200 mm (Basic body II)
- Sharkbit Ø 250 mm (Basic body II)
- Sharkbit Ø 300 mm (Basic body II)
- Sharkbit Ø 350 mm (Basic body II)
- Sharkbit Ø 400 mm (Basic body II)
- Sharkbit Ø 450 mm (Basic body II)
- Sharkbit Ø 500 mm (Basic body II)
- Sharkbit Ø 550 mm (Basic body II)
- Claw cutter Ø 350 mm (Basic body II)
- Claw cutter Ø 400 mm (Basic body II)
- Claw cutter Ø 450 mm (Basic body II)
- Claw cutter Ø 500 mm (Basic body II)
- HSR Disc Reamer
- Hard-Soil-Reamer (HSR) for coarse gravel mixed soils, debris, hard and aggressive soils
Rock Reamer- 8 " (Ø 215 mm) - TD 61 with swivel 15 tons
- 8 " (Ø 215 mm) - TD 73 with sviwel 30 tons
- 8 " (Ø 215 mm) - TD 82 with swivel 30 tons
- 8 " (Ø 215 mm) - EL 80 with swivel 15 tons
- 8 " (Ø 215 mm) - EL 101 with swivel 30 tons
- 8 " (Ø 215 mm) - EL 104 with swivel 30 tons
- 10 " (Ø 260 mm) - TD 61 with swivel 15 tons
- 10 " (Ø 260 mm) - TD 73 with swivel 30 tons
- 10 " (Ø 260 mm) - TD 82 with swivel 30 tons
- 10 " (Ø 260 mm) - EL 80 with swivel 15 tons
- 10 " (Ø 260 mm) - EL 101 with swivel 30 tons
- 10 " (Ø 260 mm) - EL 104 with swivel 30 tons
- 12 " (Ø 320 mm) - TD 61 with swivel 15 tons
- 12 " (Ø 320 mm) - TD 73 with swivel 30 tons
- 12 " (Ø 320 mm) - TD 82 with swivel 30 tons
- 12 " (Ø 320 mm) - EL 80 with swivel 15 tons
- 12 " (Ø 320 mm) - EL 101 with swivel 30 tons
- 12 " (Ø 320 mm) - EL 104 with swivel 30 tons
- 12 " (Ø 320 mm) - 2 7/8" API.IF with swivel 30 tons
- 14 " (Ø 370 mm) - TD 82 with swivel 30 tons
- 14 " (Ø 370 mm) - EL 80 with swivel 30 tons
- 14 " (Ø 370 mm) - EL 101 with swivel 30 tons
- 14 " (Ø 370 mm) - EL 104 with swivel 30 tons
- 14 " (Ø 370 mm) - 2 7/8" API.IF with swivel 30 tons
- 16 " (Ø 430 mm) - TD 73 with swivel 30 tons
- 16 " (Ø 430 mm) - TD 82 with swivel 30 tons
- 16 " (Ø 430 mm) - EL 80 with swivel 15 tons
- 16 " (Ø 430 mm) - EL 101 with swivel 30 tons
- 16 " (Ø 430 mm) - EL 104 with swivel 30 tons
- 18 " (Ø 457 mm) - TD 82 with swivel 30 tons
- 18 " (Ø 457 mm) - TD 82 with swivel 30 tons
- 18 " (Ø 457 mm) - EL 80 with swivel 30 tons
- 18 " (Ø 457 mm) - EL 101 with swivel 30 to
- 18 " (Ø 457 mm) - EL 104 with swivel 30 tons
- 20 " (Ø 525 mm) - TD 82 with swivel 30 tons
- 20 " (Ø 525 mm) - EL 104 with swivel 30 tons
- 20 " (Ø 525 mm) - EL 80 with swivel 30 tons
- 20 " (Ø 525 mm) - EL 101 with swivel 30 tons
- 22 " (Ø 560 mm) - EL 80 with swivel 30 tons
- 22 " (Ø 560 mm) - EL 104 with swivel 30 tons
- 22 " (Ø 560 mm) - TD 82 with swivel 30 tons
- 22 " (Ø 560 mm) - EL 101 with swivel 30 tons
- 24 " (Ø 610 mm) - TD 82 with swivel 30 tons
- 24 " (Ø 610 mm) - EL 101 with swivel 30 tons
- 24 " (Ø 610 mm) - EL 104 with swivel 30 tons
- 26 " (Ø 660 mm) - TD 82 with swivel 30 tons
- 26 " (Ø 660 mm) - EL 101 with swivel 30 tons
- 26 " (Ø 660 mm) - EL 104 with swivel 30 tons
- Additional pull rods / adapters as well as reaming diameters on request
- Tool disassembly of the chisels 12" - 26"
- Backreamer-Zubehör
- Sharkbit, Height: 25 mm - Width: 20 mm
- Sharkbit, height 49 mm - width 25 mm
- Round-framed chisel, 20 mm
- Chisel retainer for shaft diameter 20 mm
- Round-framed chisel, 25 mm
- Chisel retainer for shaft diameter 25 mm
- Weld-on claw, Height: 27 mm - Width: 20 mm
- Weld-on claw, Height: 45 mm - Width: 20 mm
- Weld-on claw, Height: 65 mm - Width: 20 mm
- Guiding sleeve with weld-on burls
- Spare chisel for Rock Reamer 8" and 10"
- HSR Chisel Reamer
- Swivels
- Swivel - screw version 5t Thread M55
- Swivel - screw version 10t Thread M70
- Swivel - bolt-on version 15t Thread 8 x M16
- Swivel - bolt-on version 15t Thread 3 x M16
- Swivel - bolt-on version 30t Thread 8 x M16
- Swivel - Bracket - Bracket 5 tons
- Swivel 3 1/2"API.Reg 5 tons
- Swivel Flange - Tension Pin Shaft 12 ton Swivel
- Push heads
- Thrust/Push head (light-weight build)
- Thrust/Push head 4X / 5X - Ø 114 mm
- Thrust/Push head RD 49 - Ø 140 mm
- Thrust/Push head TD 48 - Ø 140 mm
- Thrust/Push head TD 61 - Ø 140 mm
- Thrust/Push head TD 73 - Ø 120 mm
- Thrust/Push head TD 73 - Ø 170 mm
- Thrust/Push head TD 82 - Ø 170 mm
- Thrust/Push head EL 80 - Ø 140 mm
- Thrust/Push head EL 95/101 - Ø 140 mm
- Thrust/Push head EL 104 - Ø 170 mm - Identical to YY 246695
- Thrust/Push head with steering surface
- Thrust/Push head (light-weight build)
- Pipe pullers
- Pipe pullers
- Pipe puller Ø 25 mm
- Pipe puller Ø 32 mm
- Pipe puller Ø 40 mm
- Pipe puller Ø 50 mm
- Pipe puller Ø 63 mm
- Pipe puller Ø 75 mm
- Pipe puller Ø 90 mm
- Pipe puller Ø 110 mm
- Pipe puller Ø 125 mm
- Pipe puller Ø 140 mm
- Pipe puller Ø 160 mm
- Pipe puller Ø 180 mm
- Pipe puller Ø 200 mm
- Pipe puller Ø 225 mm
- Pipe puller Ø 250 mm
- Pipe puller Ø 280 mm
- Pipe puller Ø 315 mm
- Pipe puller Ø 355 mm
- Pipe puller Ø 400 mm
- Pipe puller Ø 450 mm
- Pipe puller Ø 500 mm
- Seal kits for Pipe puller
- Connection elements for Pipe puller
- Cutting nipples (incl. rear seal)
- Multi-pulling device
- Cable Pulling Sock 30 - 40mm
- Cable Pulling Sock 40 - 50mm
- Cable Pulling Sock 50 - 60mm
- Pulling Eyes
- Pulling eye Socket TD 61
- Pulling eye Socket TD 73
- Pulling eye Socket TD 82
- Pulling eye Socket Elicon 95
- Pulling eye Socket EL 67
- Pulling eye Socket EL 80
- Pulling eye Socket EL 104
- Pulling eye Nipple 4X / 5X
- Pulling eye Nipple TD 61
- Pulling eye Nipple TD 73
- Pulling eye Nipple TD 82
- Pulling eye Nipple Elicon 95
- Pulling eye Nipple EL 67
- Pulling eye Nipple EL 80
- Pulling eye Nipple EL 104
- PE Welding head
- PE Welding head DA 63
- PE Welding head DA 75
- PE Welding head DA 90
- PE Welding head DA 110
- PE Welding head DA 125
- PE Welding head DA 140
- PE Welding head DA 160
- PE Welding head DA 180
- PE Welding head DA 200
- PE Welding head DA 225
- PE Welding head DA 250
- PE Welding head DA 280
- PE Welding head DA 315
- PE Welding head DA 355
- PE Welding head DA 400
- PE Welding head DA 450
- PE Welding head DA 500
- PE Welding head DA 560
- Pipe pullers
- Rock drilling technique
- Grundorock
- GRUNDOROCK 375-6.5 Mud-Motor with rock drilling unit
- Rock drilling unit for twin-tube rods EL 80
- Rock drilling unit for twin-tube rods EL 95 / EL 101
- Rock drilling unit for twin-tube rods EL 101
- Rock drilling unit for twin-tube rods EL 104
- Chisel for Grundorock 4 3/4 "
- Rock drilling chisel for GRUNDODRILL ACS 130
- Chisel for GRUNDODRILL 18ACS, 20ACS, ACS 300
- Roller chisel 6 1/2 " Milled Tooth (IADC 217)
- Roller chisel 6 1/2 " TCI (IADC 547)
- Roller chisel 6 1/2 " TCI (IADC 637)
- Roller chisel 6 1/2 " TCI (IADC 837)
- Winged chisel 6 1/2 "
- PDC drilling chisel Ø 6 1/2 " with 4 wings
- PDC drilling chisel Ø 6 1/2 " with 5 wings
- PDC drilling chisel Ø 6 1/2 " with 6 wings
- Mounting wrench for jet nozzles of PDC drilling chisel
- HSR Hole Opener 4 "
- HSR Hole Opener 5,5 "
- HSR Hole Opener 8 "
- HSR Hole Opener 10 "
- Hole Opener mit Body 16 "
- PDC Hole Opener 12", 14", 16"
- PDC Hole Opener with fixed blades - 8", 10", 12", 14", 16", 18", 20"
- Body incl. swivel 8"
- Body incl. swivel 10"
- Body incl. swivel 12"
- Body incl. swivel 14"
- Body incl. swivel 16"
- Body incl. swivel 18"
- Body incl. swivel 20"
- Adapter on drill rod for EL 80 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 95 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 104 - PDC Hole Opener with fixed blades
- Adapter on drill rod for TD 82 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 80 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 95 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 104 - PDC Hole Opener with fixed blades
- Centralizer
- Centralizer for drill hole-Ø 10 " TD82M x TD118N
- Centralizer for drill hole-Ø 10 "
- Centralizer for drill hole-Ø 12 " TD82M x TD118N
- Centralizer for drill hole-Ø 12 " TD82M x 2 7/8 API
- Centralizer for drill hole-Ø 12 "
- Centralizer for drill hole-Ø 14 " TD82M x TD118N
- Centralizer for drill hole-Ø 14 " TD82M x 2 7/8 API
- Centralizer for drill hole-Ø 16 " TD82M x TD118N
- Centralizer for drill hole-Ø 16 " TD82M x 2 7/8 API
- Rod release devices
- Detection technique
- Tensile load measuring
- GRUNDOLOG Type III
- GRUNDOLOG III, 150 kN self-sustaining, connection 150 kN
- GRUNDOLOG III, 400 kN self-sustaining, connection 150 kN
- GRUNDOLOG III, 400 kN self-sustaining, connection 400 kN
- GRUNDOLOG III, 150KN wireless, for display on the GRUNDODRILL display
- GRUNDOLOG III, 150KN wireless, for display on a separate display
- GRUNDOLOG III 400 kN wireless, for display on a GRUNDODRILL-display
- GRUNDOLOG III, 400 kN wireless, for display on a separate display
- Hinged hook wrench for fastening the protection sleeve
- GRUNDOLOG Type III
- Trenchless cable exchange
- Retrieval tools
- Pipe Cutter
- Pipe Cutter TD 61 socket, Ø 110 mm
- Pipe Cutter TD 61 socket, Ø 125 mm
- Pipe Cutter TD 61 socket Ø 140 mm
- Pipe Cutter TD 82 socket, Ø 160 mm
- Pipe Cutter TD 82 socket, Ø 180 mm
- Pipe Cutter TD 82 socket, Ø 225 - Ø 250 mm
- Pipe Cutter TD 82 socket, Ø 280 mm
- Pipe Cutter TD 82 socket, Ø 315 mm
- Pipe Cutter TD 82 socket, Ø 355 mm
- Pipe Cutter TD 82 socket, Ø 450 mm
- Pipe Cutter
Do you have any product or
service related questions?
Please contact us:
+49 (0) 2723 808-0
Send E-Mail
Download PDF Catalog
service related questions?
Please contact us:
+49 (0) 2723 808-0
Send E-Mail
Download PDF Catalog
GRUNDOLOG Type III
GRUNDOLOG III, 150KN wireless, for display on a separate display
Part No.: DRI K3E1X15
Grundolog is a measuring system for documenting and controlling the tensile loads affecting the new pipe during installation. These tensile loads are recorded at a measuring precision of 0,1 % from the nominal value. The light weight and the short structural shape allow simple assembly and easy handling. The measuring bodies are battery-driven. The system includes battery charger, cable and software. The connection to swivel and pipe puller is designed for the max. pulling force.
In the wireless version, in addition to being recorded, the data are transmitted online through the ground and displayed to the machine operator. The display appears on a separate screen, allowing for direct intervention in the retraction process.
