- Pilot bore heads
- for clay, silt, loam, marl
Soft Drill Head (SDH) - Steering plates for SDH Soft Drill Head
- Steering plate type Standard for TD 82 L 200 mm
- Steering plate type Standard for TD 82
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Standard for TD 48, TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate type Triangle for TD 61, TD 73, Rd 49
- Steering plate type Triangle for TD 82
- Steering plate TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate bent for TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate bent for TD 82, EL 104
- Steering plate with weld-on teeth for TD 61, TD 73, Rd 49, EL 67, EL 80
- Steering plate with weld-on teeth for TD 82, EL-D104
- Steering plate with weld-on teeth for TD 82, EL 104
- for fine sand up to medium gravel soils
Medium Drill Head (MDH) Type 1- For muzzleloader transmitter housing
- For side loader transmitter housing
- MDH-Gravel Type - Medium Drill Head Type 1 für TD 73 - Ø 115 mm for side loader transmitter housing
- Medium Drill Head Type 1 for EL 104 - Ø 190 mm for side loader transmitter housing
- MDH-Gravel Type - Medium Drill Head Type 1 für TD 82 - Ø 150 mm for side loader transmitter housing
- Medium Drill Head Type 1 for TD 82 / EL 95 - Ø 190 mm for side loader transmitter housing
- for fine sand up to medium gravel soils
Medium Drill Head (MDH) Type 2 - for fine sand up to medium gravel soils
Medium Drill Head (MDH) Type 3 - for coarse gravel mixed soils, debris, hard and aggressive soils
Hard Drill Head (HDH) Type 1- For muzzleloader transmitter housing
- Hard Drill Head Type 1 - Ø 85 mm, for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 61, EL 67 - Ø 95 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 61, EL 67 - Ø 115 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 73, EL 80 - Ø 115 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 for TD 73, EL 80 - Ø 125 mm with exchangeable round framed chisels
- Hard Drill Head Type 1 for TD 82 - Ø 130 mm for muzzleloader transmitter housing
- Hard Drill Head Type 1 für TD 82 / EL 95 - Ø 155 mm for muzzleloader transmitter housing
- For side loader transmitter housing
- Hard Drill Head Type 1 for TD 73 - Ø 115 mm for side loader transmitter housing
- Hard Drill Head Type 1 for TD 73, EL 80 - Ø 125 mm, with exchangeable round framed chisels
- Hard Drill Head Type 1 for TD 82 - Ø 130 mm for side loader transmitter housing
- Hard Drill Head Type 1 for TD 82 / EL 95 - Ø 155 mm for side loader transmitter housing
- Hard Drill Head Type 1 for EL 104 - Ø 155 mm for side loader transmitter housing
- Hard Drill Head Type 1 for EL 104 - Ø 195 mm for side loader transmitter housing
- For muzzleloader transmitter housing
- for coarse gravel mixed soils, debris, hard and aggressive soils
Hard Drill Head (HDH) Type 2- For muzzleloader transmitter housing
- Hard Drill Head Type 2 for TD 48 / TD 61 - Ø 80 mm, only for transmitter housing Ø 65 mm - muzzleloader
- Hard Drill Head Type 2 for TD 61, EL 67 - Ø 95 mm, for transmitter housing Ø 75 mm - muzzleloader
- Hard Drill Head Type 2 für TD 73, EL 80 - Ø 115 mm, for muzzleloader transmitter housing
- Hard Drill Head Type 2 for TD 82 - Ø 120 mm for muzzleloader transmitter housing
- For side loader transmitter housing
- For muzzleloader transmitter housing
- for hard, compact, non-displaceable soils
Hard Drill Head (HDH) 4-finger - Round-framed chisel
- exchangeable round-framed chisel for 4X / 5X (MDH Type 1)
- exchangeable round-framed chisels for TD 61, EL 67 (MDH Type 2)
- exchangeable round-framed chisels for TD 61, TD 73, EL 67, EL 80 (MDH Type 1)
- exchangeable round-framed chisels for TD 73, EL 80 (MDH Type 2)
- exchangeable round-framed chisels for TD 82 (MDH Type 1 and 2) Ø 150mm
- exchangeable round-framed chisels for TD 82, EL 95, EL 104 (MDH Type 1) Ø 190 mm
- Round-framed chisels with hardened layer
- exchangeable round-framed chisels with hardened layer for TD 61, EL 67 (MDH Type 2)
- exchangeable round-framed chisels with hardened layer for TD 61, TD 73, EL 67, EL 80 (MDH Type 1)
- exchangeable round-framed chisels with hardened layer for TD 73, EL 80 (MDH Type 2)
- exchangeable round-framed chisels with hardened layer for TD 82
- exchangeable round-framed chisels with hardened layer for TD 82, EL 95, EL 104 (MDH Type 1)
- for clay, silt, loam, marl
- Sonde housings
- Sonde housing EL 67 - Ø 75 mm, for standard sondes
- Sonde housing EL 67 - Ø 75 mm, for long sonds and cable sondes
- Sonde house EL 80 - Ø 85 mm, for standard sondes
- Sonde housing EL 80 - Ø 85 mm, for long sondes and cable sondes
- Sonde housing 4X / 5X - Ø 65 mm, for standard sondes without buffer
- Sonde housing TR 34 - Ø 65 mm
- Sonde housing RD 49 - Ø 70 mm
- Sonde housing TD 48 - Ø 65 mm
- Sonde housing TD 61 - Ø 75 mm, for standard sondes (15XP)
- Sonde housing TD 61 - Ø 75 mm, for Eclipse cable sondes + EXL sondes, long version (15XP)
- Sonde housings TD 73 - Ø 85 mm, for standard sonde housings
- Sonde housing TD 73 - Ø 85 mm, for Eclipse cable sondes + EXL sondes, long version
- Sonde housing TD 82 - Ø 100 mm, for Eclipse cable sondes + EXL sondes, long version
- Sonde housing TD 82 - Ø 100 mm, incl. facility for cable-guided bores
- Side loader Sonde housing TD 73 - Ø 85 mm, for standard (15“) sondes
- Side loader Sonde housing TD 82 - Ø 100 mm, for standard (15“) sondes
- Side loader Sonde housing TD 82 - Ø 100 mm, for long (19“) sondes
- Side loader Sonde housing EL 104 - Ø 110 mm, for long sondes and cable sondes
- Side loader Sonde housing EL 104 - Ø 110 mm, for standard probes
- Side loader Sonde housing EL 104 - Ø 110 mm, for long sondes and cable sondes
- Quick-Connector
- Drill rods
- Backreamers
- HSR Chisel Reamer
- Plug-in Reamer Ø 120 mm, Burls, for sonde housing Ø 65-75 mm
- Plug-in Reamer Ø 125 mm, Burls, for sonde housing Ø 85 mm
- Plug-in Reamer Ø 130 mm, Sharkbit, for sonde housing Ø 65-75 mm
- Plug-in Reamer Ø 140 mm, Weld-on claw, for sonde housing Ø 100 mm
- Plug-in Reamer Ø 165 mm, Sharkbit, for sonde housing Ø 75 mm
- Plug-in Reamer Ø 165 mm, Sharkbit, for sonde housing Ø 85 mm
- Plug-in Reamer Ø 175 mm, Sharkbit, for sonde housing Ø 104 mm
- Additional sizes on request
- Soft-Soil-Reamer (SSR) for clay, loam, silt, marl
Winged Reamer / Flycutter - Medium-Soil-Reamer (MSR) for fine sand to medium gravel soils
Stepped Reamer- Backreamer Ø140 mm, welded claw, 5t swivel, TD61
- Backreamer Ø160 mm, welded claw, 10t swivel, TD61
- Backreamer Ø200 mm, welded claw, 10t swivel, TD61
- Backreamer Ø225 mm, welded claw, 15t swivel, TD82
- Backreamer Ø270 mm, welded claw, 15t swivel, TD82
- Backreamer Ø325 mm, welded claw, 15t swivel, TD82
- Backreamer Ø415 mm, welded claw, 30t swivel, TD82
- Backreamer Ø440 mm, welded claw, 30t swivel, TD82
- Backreamer Ø530 mm, welded claw, 30t swivel, TD82
- Additional pull rods / adapters as well as reaming diameters on request
- Medium-Soil-Reamer (MSR) for fine sand up to medium gravel soils
Cone Reamer- Cone reamer Ø 220, Sharkbit, 15t swivel, TD73
- Cone reamer Ø 270, Sharkbit, 15t swivel, TD73
- Cone reamer Ø 325, Sharkbit, 15t swivel, TD73
- Cone reamer Ø 220, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 270, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 325, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 405, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 455, Sharkbit, 30t swivel, TD82
- Cone reamer Ø 500, Sharkbit, 30t swivel, TD82
- Additional pull rods / adapters as well as reaming diameters on request
- Medium-Soil-Reamer (MSR) for fine sand up to medium gravel soils
Grundoream - Sharkbit Blade set
- Sharkbit Ø 150 mm (Basic body I)
- Sharkbit Ø 200 mm (Basic body I)
- Sharkbit Ø 250 mm (Basic body I)
- Sharkbit Ø 200 mm (Basic body II)
- Sharkbit Ø 250 mm (Basic body II)
- Sharkbit Ø 300 mm (Basic body II)
- Sharkbit Ø 350 mm (Basic body II)
- Sharkbit Ø 400 mm (Basic body II)
- Sharkbit Ø 450 mm (Basic body II)
- Sharkbit Ø 500 mm (Basic body II)
- Sharkbit Ø 550 mm (Basic body II)
- Claw cutter Ø 350 mm (Basic body II)
- Claw cutter Ø 400 mm (Basic body II)
- Claw cutter Ø 450 mm (Basic body II)
- Claw cutter Ø 500 mm (Basic body II)
- HSR Disc Reamer
- Hard-Soil-Reamer (HSR) for coarse gravel mixed soils, debris, hard and aggressive soils
Rock Reamer- 8 " (Ø 215 mm) - TD 61 with swivel 15 tons
- 8 " (Ø 215 mm) - TD 73 with sviwel 30 tons
- 8 " (Ø 215 mm) - TD 82 with swivel 30 tons
- 8 " (Ø 215 mm) - EL 80 with swivel 15 tons
- 8 " (Ø 215 mm) - EL 101 with swivel 30 tons
- 8 " (Ø 215 mm) - EL 104 with swivel 30 tons
- 10 " (Ø 260 mm) - TD 61 with swivel 15 tons
- 10 " (Ø 260 mm) - TD 73 with swivel 30 tons
- 10 " (Ø 260 mm) - TD 82 with swivel 30 tons
- 10 " (Ø 260 mm) - EL 80 with swivel 15 tons
- 10 " (Ø 260 mm) - EL 101 with swivel 30 tons
- 10 " (Ø 260 mm) - EL 104 with swivel 30 tons
- 12 " (Ø 320 mm) - TD 61 with swivel 15 tons
- 12 " (Ø 320 mm) - TD 73 with swivel 30 tons
- 12 " (Ø 320 mm) - TD 82 with swivel 30 tons
- 12 " (Ø 320 mm) - EL 80 with swivel 15 tons
- 12 " (Ø 320 mm) - EL 101 with swivel 30 tons
- 12 " (Ø 320 mm) - EL 104 with swivel 30 tons
- 12 " (Ø 320 mm) - 2 7/8" API.IF with swivel 30 tons
- 14 " (Ø 370 mm) - TD 82 with swivel 30 tons
- 14 " (Ø 370 mm) - EL 80 with swivel 30 tons
- 14 " (Ø 370 mm) - EL 101 with swivel 30 tons
- 14 " (Ø 370 mm) - EL 104 with swivel 30 tons
- 14 " (Ø 370 mm) - 2 7/8" API.IF with swivel 30 tons
- 16 " (Ø 430 mm) - TD 73 with swivel 30 tons
- 16 " (Ø 430 mm) - TD 82 with swivel 30 tons
- 16 " (Ø 430 mm) - EL 80 with swivel 15 tons
- 16 " (Ø 430 mm) - EL 101 with swivel 30 tons
- 16 " (Ø 430 mm) - EL 104 with swivel 30 tons
- 18 " (Ø 457 mm) - TD 82 with swivel 30 tons
- 18 " (Ø 457 mm) - TD 82 with swivel 30 tons
- 18 " (Ø 457 mm) - EL 80 with swivel 30 tons
- 18 " (Ø 457 mm) - EL 101 with swivel 30 to
- 18 " (Ø 457 mm) - EL 104 with swivel 30 tons
- 20 " (Ø 525 mm) - TD 82 with swivel 30 tons
- 20 " (Ø 525 mm) - EL 104 with swivel 30 tons
- 20 " (Ø 525 mm) - EL 80 with swivel 30 tons
- 20 " (Ø 525 mm) - EL 101 with swivel 30 tons
- 22 " (Ø 560 mm) - EL 80 with swivel 30 tons
- 22 " (Ø 560 mm) - EL 104 with swivel 30 tons
- 22 " (Ø 560 mm) - TD 82 with swivel 30 tons
- 22 " (Ø 560 mm) - EL 101 with swivel 30 tons
- 24 " (Ø 610 mm) - TD 82 with swivel 30 tons
- 24 " (Ø 610 mm) - EL 101 with swivel 30 tons
- 24 " (Ø 610 mm) - EL 104 with swivel 30 tons
- 26 " (Ø 660 mm) - TD 82 with swivel 30 tons
- 26 " (Ø 660 mm) - EL 101 with swivel 30 tons
- 26 " (Ø 660 mm) - EL 104 with swivel 30 tons
- Additional pull rods / adapters as well as reaming diameters on request
- Tool disassembly of the chisels 12" - 26"
- Backreamer-Zubehör
- Sharkbit, Height: 25 mm - Width: 20 mm
- Sharkbit, height 49 mm - width 25 mm
- Round-framed chisel, 20 mm
- Chisel retainer for shaft diameter 20 mm
- Round-framed chisel, 25 mm
- Chisel retainer for shaft diameter 25 mm
- Weld-on claw, Height: 27 mm - Width: 20 mm
- Weld-on claw, Height: 45 mm - Width: 20 mm
- Weld-on claw, Height: 65 mm - Width: 20 mm
- Guiding sleeve with weld-on burls
- Spare chisel for Rock Reamer 8" and 10"
- HSR Chisel Reamer
- Swivels
- Swivel - screw version 5t Thread M55
- Swivel - screw version 10t Thread M70
- Swivel - bolt-on version 15t Thread 8 x M16
- Swivel - bolt-on version 15t Thread 3 x M16
- Swivel - bolt-on version 30t Thread 8 x M16
- Swivel - Bracket - Bracket 5 tons
- Swivel 3 1/2"API.Reg 5 tons
- Swivel Flange - Tension Pin Shaft 12 ton Swivel
- Push heads
- Thrust/Push head (light-weight build)
- Thrust/Push head 4X / 5X - Ø 114 mm
- Thrust/Push head RD 49 - Ø 140 mm
- Thrust/Push head TD 48 - Ø 140 mm
- Thrust/Push head TD 61 - Ø 140 mm
- Thrust/Push head TD 73 - Ø 120 mm
- Thrust/Push head TD 73 - Ø 170 mm
- Thrust/Push head TD 82 - Ø 170 mm
- Thrust/Push head EL 80 - Ø 140 mm
- Thrust/Push head EL 95/101 - Ø 140 mm
- Thrust/Push head EL 104 - Ø 170 mm - Identical to YY 246695
- Thrust/Push head with steering surface
- Thrust/Push head (light-weight build)
- Pipe pullers
- Pipe pullers
- Pipe puller Ø 25 mm
- Pipe puller Ø 32 mm
- Pipe puller Ø 40 mm
- Pipe puller Ø 50 mm
- Pipe puller Ø 63 mm
- Pipe puller Ø 75 mm
- Pipe puller Ø 90 mm
- Pipe puller Ø 110 mm
- Pipe puller Ø 125 mm
- Pipe puller Ø 140 mm
- Pipe puller Ø 160 mm
- Pipe puller Ø 180 mm
- Pipe puller Ø 200 mm
- Pipe puller Ø 225 mm
- Pipe puller Ø 250 mm
- Pipe puller Ø 280 mm
- Pipe puller Ø 315 mm
- Pipe puller Ø 355 mm
- Pipe puller Ø 400 mm
- Pipe puller Ø 450 mm
- Pipe puller Ø 500 mm
- Seal kits for Pipe puller
- Connection elements for Pipe puller
- Cutting nipples (incl. rear seal)
- Multi-pulling device
- Cable Pulling Sock 30 - 40mm
- Cable Pulling Sock 40 - 50mm
- Cable Pulling Sock 50 - 60mm
- Pulling Eyes
- Pulling eye Socket TD 61
- Pulling eye Socket TD 73
- Pulling eye Socket TD 82
- Pulling eye Socket Elicon 95
- Pulling eye Socket EL 67
- Pulling eye Socket EL 80
- Pulling eye Socket EL 104
- Pulling eye Nipple 4X / 5X
- Pulling eye Nipple TD 61
- Pulling eye Nipple TD 73
- Pulling eye Nipple TD 82
- Pulling eye Nipple Elicon 95
- Pulling eye Nipple EL 67
- Pulling eye Nipple EL 80
- Pulling eye Nipple EL 104
- PE Welding head
- PE Welding head DA 63
- PE Welding head DA 75
- PE Welding head DA 90
- PE Welding head DA 110
- PE Welding head DA 125
- PE Welding head DA 140
- PE Welding head DA 160
- PE Welding head DA 180
- PE Welding head DA 200
- PE Welding head DA 225
- PE Welding head DA 250
- PE Welding head DA 280
- PE Welding head DA 315
- PE Welding head DA 355
- PE Welding head DA 400
- PE Welding head DA 450
- PE Welding head DA 500
- PE Welding head DA 560
- Pipe pullers
- Rock drilling technique
- Grundorock
- GRUNDOROCK 375-6.5 Mud-Motor with rock drilling unit
- Rock drilling unit for twin-tube rods EL 80
- Rock drilling unit for twin-tube rods EL 95 / EL 101
- Rock drilling unit for twin-tube rods EL 101
- Rock drilling unit for twin-tube rods EL 104
- Chisel for Grundorock 4 3/4 "
- Rock drilling chisel for GRUNDODRILL ACS 130
- Chisel for GRUNDODRILL 18ACS, 20ACS, ACS 300
- Roller chisel 6 1/2 " Milled Tooth (IADC 217)
- Roller chisel 6 1/2 " TCI (IADC 547)
- Roller chisel 6 1/2 " TCI (IADC 637)
- Roller chisel 6 1/2 " TCI (IADC 837)
- Winged chisel 6 1/2 "
- PDC drilling chisel Ø 6 1/2 " with 4 wings
- PDC drilling chisel Ø 6 1/2 " with 5 wings
- PDC drilling chisel Ø 6 1/2 " with 6 wings
- Mounting wrench for jet nozzles of PDC drilling chisel
- HSR Hole Opener 4 "
- HSR Hole Opener 5,5 "
- HSR Hole Opener 8 "
- HSR Hole Opener 10 "
- Hole Opener mit Body 16 "
- PDC Hole Opener 12", 14", 16"
- PDC Hole Opener with fixed blades - 8", 10", 12", 14", 16", 18", 20"
- Body incl. swivel 8"
- Body incl. swivel 10"
- Body incl. swivel 12"
- Body incl. swivel 14"
- Body incl. swivel 16"
- Body incl. swivel 18"
- Body incl. swivel 20"
- Adapter on drill rod for EL 80 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 95 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 104 - PDC Hole Opener with fixed blades
- Adapter on drill rod for TD 82 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 80 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 95 - PDC Hole Opener with fixed blades
- Adapter on drill rod for EL 104 - PDC Hole Opener with fixed blades
- Centralizer
- Centralizer for drill hole-Ø 10 " TD82M x TD118N
- Centralizer for drill hole-Ø 10 "
- Centralizer for drill hole-Ø 12 " TD82M x TD118N
- Centralizer for drill hole-Ø 12 " TD82M x 2 7/8 API
- Centralizer for drill hole-Ø 12 "
- Centralizer for drill hole-Ø 14 " TD82M x TD118N
- Centralizer for drill hole-Ø 14 " TD82M x 2 7/8 API
- Centralizer for drill hole-Ø 16 " TD82M x TD118N
- Centralizer for drill hole-Ø 16 " TD82M x 2 7/8 API
- Rod release devices
- Detection technique
- Tensile load measuring
- GRUNDOLOG Type III
- GRUNDOLOG III, 150 kN self-sustaining, connection 150 kN
- GRUNDOLOG III, 400 kN self-sustaining, connection 150 kN
- GRUNDOLOG III, 400 kN self-sustaining, connection 400 kN
- GRUNDOLOG III, 150KN wireless, for display on the GRUNDODRILL display
- GRUNDOLOG III, 150KN wireless, for display on a separate display
- GRUNDOLOG III 400 kN wireless, for display on a GRUNDODRILL-display
- GRUNDOLOG III, 400 kN wireless, for display on a separate display
- Hinged hook wrench for fastening the protection sleeve
- GRUNDOLOG Type III
- Trenchless cable exchange
- Retrieval tools
- Pipe Cutter
- Pipe Cutter TD 61 socket, Ø 110 mm
- Pipe Cutter TD 61 socket, Ø 125 mm
- Pipe Cutter TD 61 socket Ø 140 mm
- Pipe Cutter TD 82 socket, Ø 160 mm
- Pipe Cutter TD 82 socket, Ø 180 mm
- Pipe Cutter TD 82 socket, Ø 225 - Ø 250 mm
- Pipe Cutter TD 82 socket, Ø 280 mm
- Pipe Cutter TD 82 socket, Ø 315 mm
- Pipe Cutter TD 82 socket, Ø 355 mm
- Pipe Cutter TD 82 socket, Ø 450 mm
- Pipe Cutter
Do you have any product or
service related questions?
Please contact us:
+49 (0) 2723 808-0
Send E-Mail
Download PDF Catalog
service related questions?
Please contact us:
+49 (0) 2723 808-0
Send E-Mail
Download PDF Catalog
Quick-Connector
Spare lock pins, pack with 10 pins
For quick and easy connection/loosening of the drilling tool to/from the drill rod.
A return valve which prevents infiltration of soil particles, is built as a standard.
