- Pilot bore heads
- Soft Drill Head
- Steering plates for Soft Drill Head
- Type Standard for TD 82, length 200 mm
- Type Standard for TD 82, length 240 mm
- Type Standard for TD 48, TD 61, Rd 49
length 135 mm - Type Standard for TD 48, TD 61, Rd 49
length 175 mm - Type Standard for TD 48, TD 61, Rd 49
Length 205 mm - Type Standard for TD 48, TD 61, TD 73, Rd 49
L 175 x W 110 - Type Triangle for TD 61, TD 73, Rd 49
- Type Triangle for TD 82
- for TD 61, TD 73, Rd 49
- bent, for TD 61, TD 73, Rd 49
- bent, for TD 82
- with weld-on teeth for TD 61, TD 73, Rd 49
- with weld-on teeth for TD 82
- Medium Drill Head Type 1
- Medium Drill Head Type 2
- Medium Drill Head Type 3
- Hard Drill Head Type 1
- Hard Drill Head Type 2
- Hard Drill Head Type 3 Twin Pins
- Hard Drill Head 4-Finger
- Round-framed chisel
- Round-framed chisels with hardened layer
- Sonde housings
- 4X - Ø 65 mm, for standard sondes without buffer
- TR 34 - Ø 65 mm
- RD 49 - Ø 70 mm
- TD 48 - Ø 65 mm
- TD 61 - Ø 75 mm, for standard sondes (15XP)
- TD 61 - Ø 75 mm, for Eclipse cable sondes + EXL sondes, long version (15XP)
- TD 73 - Ø 85 mm, for standard sonde housings
- TD 73 - Ø 85 mm, short cable sondes
- TD 73 - Ø 85 mm, for Eclipse cable sondes + EXL sondes, long version
- TD 82, for Eclipse cable sondes + EXL sondes, long version
- TD 82, incl. facility for cable-guided bores
- TD 73 - Ø 85 mm, Side loader, for standard (15“) sondes
- TD 82 - Ø 100 mm, Side loader, for standard (15“) sondes
- TD 82 - Ø 100 mm, Side loader, for long (19“) sondes
- Quick-Connector
- Drill rods
- Backreamers
- MSR Plug-in Reamer
- Winged Reamer / Flycutter
- Stepped Reamer
- Cone Reamer
- Grundoream
- Sharkbit Blade set
- Ø 150 mm (Basic body I)
- Ø 200 mm (Basic body I)
- Ø 250 mm (Basic body I)
- Ø 200 mm (Basic body II)
- Ø 250 mm (Basic body II)
- Ø 300 mm (Basic body II)
- Ø 350 mm (Basic body II)
- Ø 400 mm (Basic body II)
- Ø 450 mm (Basic body II)
- Ø 500 mm (Basic body II)
- Ø 550 mm (Basic body II)
- Claw cutter Ø 350 mm (Basic body II)
- Claw cutter Ø 400 mm (Basic body II)
- Claw cutter Ø 450 mm (Basic body II)
- Claw cutter Ø 500 mm (Basic body II)
- Disc Reamer
- 8 " - TD61 with swivel 15 tons
- 10” - TD61 with swivel 15 tons
- 12” - TD61 with swivel 15 tons
- 14” - TD61 with swivel 15 tons
- 16” - TD61 with swivel 15 tons
- 18” - TD61 with swivel 15 tons
- 8 " - TD73 with swivel 15 tons
- 10” - TD73 with swivel 30 tons
- 12” - TD73 with swivel 30 tons
- 14” - TD73 with swivel 30 tons
- 16 " - TD73 with swivel 30 tons
- 18 " - TD73 with swivel 30 tons
- 8 " - TD82 with swivel 15 tons
- 10 " TD82 with swivel 30 tons
- 12 " - TD82 with swivel 30 tons
- 14 " - TD82 with swivel 30 tons
- 16 " - TD82 with swivel 30 tons
- 18 " - TD82 with swivel 30 tons
- HSR Rock Reamer up to 60 MPa
- 8 " (Ø 215 mm) - TD 61 with swivel 15 tons
- 8 " (Ø 215 mm) - TD 73 with sviwel 30 tons
- 8 " (Ø 215 mm) - TD 82 with swivel 30 tons
- 10 " (Ø 260 mm) - TD 61 with swivel 15 tons
- 10 " (Ø 260 mm) - TD 73 with swivel 30 tons
- 10 " (Ø 260 mm) - TD 82 with swivel 30 tons
- 12 " (Ø 320 mm) - TD 61 with swivel 15 tons
- 12 " (Ø 320 mm) - TD 73 with swivel 30 tons
- 12 " (Ø 320 mm) - TD 82 with swivel 30 tons
- 14 " (Ø 370 mm) - TD 61 with swivel 15 tons
- 14 " (Ø 370 mm) - TD 73 with swivel 30 tons
- 14 " (Ø 370 mm) - TD 82 with swivel 30 tons
- 16 " (Ø 430 mm) - TD 61 with swivel 15 to
- 16 " (Ø 430 mm) - TD 73 with swivel 30 to
- 16 " (Ø 430 mm) - TD 82 with swivel 30 to
- 18 " (Ø 457 mm) - TD 82 with swivell 30 tons
- 20 " (Ø 525 mm) - TD 82 with swivel 30 tons
- Backreamer Accessories
- Sharkbit H 25 / W 20
- Sharkbit H 31 / W 25
- Round-framed chisel 14 mm
- Chisel retainer 14 mm
- Round-framed chisel, 20 mm
- Chisel retainer 20 mm
- Round-framed chisel, 25 mm
- Chisel retainer 25 mm
- Weld-on claw, H 27 / W 20
- Weld-on claw, H 45 / W 20
- Weld-on claw, H 65 / W 20
- Guiding sleeve
- Spare chisel for Rock Reamer 8" and 10"
- Replacement-chisel for Rock Reamer 12", 14" and 16"
- Pipe pullers
- Pipe pullers
- Cutting nipples (incl. rear seal)
- Multi-pulling device
- Pulling Eyes
- Pulling eye Socket TR 34 Pit
- Pulling eye Socket TR 34 Hit
- Pulling eye Socket RD 49
- Pulling eye Socket TD 61
- Pulling eye Socket TD 73
- Pulling eye Socket TD 82
- Pulling eye Socket Elicon 95
- Pulling eye Nipple TR 34 Pit
- Pulling eye Nipple TR 34 Hit
- Pulling eye Nipple RD 49
- Pulling eye Nipple 4X
- Pulling eye Nipple TD 61
- Pulling eye Nipple TD 73
- Pulling eye Nipple TD 82
- Pulling eye Nipple Elicon 95
- PE Welding head
- PE Welding head DA 63
- PE Welding head DA 75
- PE Welding head DA 90
- PE Welding head DA 110
- PE Welding head DA 125
- PE Welding head DA 140
- PE Welding head DA 160
- PE Welding head DA 180
- PE Welding head DA 200
- PE Welding head DA 225
- PE Welding head DA 250
- PE Welding head DA 280
- PE Welding head DA 315
- PE Welding head DA 355
- PE Welding head DA 400
- PE Welding head DA 450
- PE Welding head DA 500
- PE Welding head DA 560
- Rock drilling technique
- Grundorock
- Sonde housings for rock drilling
- Rock drilling unit for twin-tube rods
- Chisel for Grundorock 2 7/8 "
- Chisel for Grundorock 3 3/4 "
- Chisel for GRUNDODRILL 18ACS
- Roller chisel 6 1/2 " Milled Tooth (IADC 117)
- Roller chisel 6 1/2 " Milled Tooth (IADC 217)
- Roller chisel 6 1/2 " TCI (IADC 517))
- Roller chisel 6 1/2 " TCI (IADC 547)
- Roller chisel 6 1/2 " TCI (IADC 637)
- Roller chisel 6 1/2 " TCI (IADC 837)
- Winged chisel 6 1/2 "
- Rock drilling chisel 6 1/2 " with hard metal plates
- Rock drilling chisel 6 1/2 "6 1/2 " with round-framed chisels
- PDC drilling chisel Ø 6 1/2 " with 4 wings
- PDC drilling chisel Ø 6 1/2 " with 5 wings
- PDC drilling chisel Ø 6 1/2 " with 6 wing
- Mounting wrench for jet nozzles of PDC drilling chisel
- HSR HoleOpener 2,5 "
- HSR Hole Opener 4 "
- HSR HoleOpener 4 " (basic body)
- 8“ TCI Cutter set (203.2 mm)
- 10“ TCI Cutter set (245 mm)
- 10 " TCI Cutter set (245 mm)
- Counter support set 6"
- Counter support set 10"
- Pulling rod for TD 61
- Pulling rod for RD 49
- Pulling rod for TD 73
- Pulling rod for TD 82
- Pulling rod for 2 3/8 " API IF Box
- Assembly tool
- Loosening wrench
- Adapter TD 82 nipple EL 95 sleeve
- HSR Hole Opener 5,5 "
- Grundo-Rock-Ream 8 "
- HSR Hole Opener 10 "
- Further rock drilling tools
- Detection technique
- DigiTrak Falcon F1®
- DigiTrak Falcon F2®
- DigiTrak Falcon F5®
- DigiTrak Falcon F5® (no display)
- DigiTrak Falcon F5® incl. GPS module (no display)
- DigiTrak Falcon F5® (Falcon Compact Display)
- DigiTrak Falcon F5® incl. GPS module (Falcon Compact Display)
- DigiTrak Falcon F5® (with AF8 display)
- DigiTrak Falcon F5® incl. GPS module (with AF8 display)
- DigiTrak Falcon F5® (with AF10 display)
- DigiTrak Falcon F5® incl. GPS module (with AF10 display)
- FT5Lp Sonde 4,5-45 kHz
- FT5p Sonde 4,5-45 kHz
- Radiodetection RD 385
- Trenchless cable exchange
Do you have any product or
service related questions?
Please contact us:
Daniel Mertens
+49 (0) 2723 808-291
+49 (0) 160 5359359
Send E-Mail
Björn Freimuth
+49 (0) 2723 808-238
+49 (0) 160 7016724
Send E-Mail
Sebastian Schwarzer
+49 (0) 2723 808-296
+49 (0) 175 4386051
Send E-Mail
Download PDF Catalog
service related questions?
Please contact us:
Daniel Mertens
+49 (0) 2723 808-291
+49 (0) 160 5359359
Send E-Mail
Björn Freimuth
+49 (0) 2723 808-238
+49 (0) 160 7016724
Send E-Mail
Sebastian Schwarzer
+49 (0) 2723 808-296
+49 (0) 175 4386051
Send E-Mail
Download PDF Catalog
Hard-Soil-Reamer (HSR) for coarse gravel mixed soils, debris, hard and aggressive soils
Rock Reamer
12 " (Ø 320 mm) - TD 61 with swivel 15 tons
Part No.: DRI 243512
- Chisels can be stroke out from behind
- for very fast bore progress
- for rock up to 60 MPa
- also applicable in mixed soils and debris
- with internal swivel
- Starting drill rod upon choice (e.g. API, Ditch Witch, Vermeer, TRACTO-TECHNIK)
Suitable for:
Accessories / Product variants:
